Moneris smartselect, Руководство по эксплуатации

Страница: 34 / 198

Configuring Your Terminal
24 SmartSELECT Merchant Operating Manual v 2.0
4.2: Configuration Shortcut
This shortcut guides you through setting up required functions, inputting options
and testing the peripheral devices, and is followed by the Introduction Shortcut.
On-line Help in the Shortcut
The
Help Topics
menu in the SmartSELECT Help System is available from
within the Shortcut any time the
?
or
??
button is enabled and at the beginning of
each step in the shortcut.
4.2.1: Following the Configuration Shortcut
Follow these steps to proceed through the Shortcut to set up required functions,
test the peripheral devices and input options:
1. Power up the terminal and wait for the Help screen to appear describing how
to use the Shortcut.
2. Press
Exit
to continue the Shortcut. The
Enter Configuration Code
prompt
appears.
3. Key in the Configuration Code (found in Section 1.2: Merchant and Terminal
Information ) and press
Enter
.
Note: To enter the “*” character in the Configuration Code, press 123 . The
Numeric with Punctuation keypad will appear. Press the * button. The
“*” will appear in the text box. Press ABC to return to the
Alphanumeric keypad and continue entering the Configuration Code.
The printer test message appears.
4. The terminal and any attached devices are tested in the following order:
• the printer
• the POS Admin Card (if your terminal configuration includes this)
• the PINPAD (if your terminal will process Debit cards)
• Communications method (as identified in your configuration code)
a. You may be prompted to enter information for the devices as they are
tested. Follow the prompts and key in the requested data.
b. If the device’s configuration is valid, the terminal displays
Device OK
for
three seconds and then a Help screen appears describing the next device
test or, if all devices have been tested, the configuration types available.
Note: If any of the peripheral device tests fail, a Help screen will appear
suggesting possible problems and solutions. Press
Exit to return to the
shortcut where you will be prompted to retry the test.
c. Press
Exit
to continue the shortcut.
5. The
Select Configuration Type?
prompt appears.
Note: You will need to key in your Merchant ID Number and the Moneris Host
telephone number during this portion of the configuration. See Section
1.2: Merchant and Terminal Information
for these numbers.
• If you wish to be prompted to configure each parameter or if you will
be processing Purchasing Card transactions, select
Recommended
.
Go to step 6.