background image

JUNK DO NOT EXPORT

PART LIST

 KEY 

QTY 

DESCRIPTION

1  

Leg A

2  

Leg B

3  

Frame

4  

Feet

5  

Side Bracket

6  

Motor Rod

7  

Desk Top

8   

10 

Wooden Dowel

9  

Cable Port

10 

Allen Key

1 1 

Screwdriver

12 

Control Panel

13 

Power Supply

14 

Power Cord

15 

32 

M6 Screws

16 

M4 Screw

17 

Tapping Screws

CARE & MAINTENANCE

PREVENTATIVE MAINTENANCE & WARNING!

• Use this product only for seating one person at a time.

• Do not climb, sit or stand on this product.

• Do not place objects on the product when in motion.

• Do not use this product on uneven floor surface.

•  Do not use product unless all bolts, screws and brackets are tight. At least 

every three months check all bolts, screws and brackets to ensure they are 

tight.

• Do not place the product in a humid environment.

• Do not place heavy objects on the table when in storage.

•  If any parts are missing, broken, damaged or worn do not use the product 

until repairs are made using factory authorised parts.

• Dispose of packaging properly.

• Plastic bags used for packaging are not toys.

• Do not use plastic bag as a head covering as it may cause suffocation.

• Failure to follow these warnings could result in serious injury.

GENERAL CARE

To maintain the appearance of the product wipe the 

surface with a clean cloth dampened with a mild 

detergent solution.

Do not remove any parts for separate cleaning.

Do not saturate the product with water or other 

cleaning liquids.

Do not shampoo clean.

Do not clean with hot water extraction machine.

Do not clean with onsite drycleaning machine.

Protect from direct sunlight, heat and weather.

MANUFACTURED:

.................................../...................................

 MM 

YY

NEW ZEALAND

3 Donnor Place

Mount Wellington

Auckland 1060

AUSTRALIA

9/30 Florence Street

Teneriffe

Brisbane 4006

GUARANTEE

Please refer to www.buroseating.com for guarantee terms 

and conditions.

Содержание LYPTASIT STAND DESK











Отзывы: