Monarch Pathfinder Ultra Silver 6032, Быстрый старт, Страница: 6 / 13

5
6. Press the supply lock tab down to lock the supply holder in place.
7. Place a roll of supply in the supply holder so it unrolls from the bottom.
8. Load the supplies for the printing mode you want: Peel or Non-Peel.
Loading for Peel Mode
1. Peel and discard the first four inches of labels from the backing paper.
2. Hold the printer upright and gently press down on the label deflector.
It may be stiff.
3. Feed all four inches of the backing paper over the peel bar and under the
applicator roller and the label deflector.
4. Push the label deflector up until it snaps into place.
5. Partially close the cover to the first position.
Label Deflector
Peel Bar
Applicator Roller