Monarch NICE 5000, Руководство пользователя

Страница: 199 / 233

NICE5000 User Manual 7 Description of Function Codes
- 197 -
Function Code Parameter Name Setting Range Default Unit Property
FP-01 Parameter update 0–4 0 -
★
It is used to set processing on the parameters.
The values are as follows:
• 0: No operation
• 1: Restore default settings
• 2: Clear fault records
• 3: Restore logic board parameters
• 4: Restore all parameter setting
Function Code Parameter Name Setting Range Default Unit Property
FP-02 User-defined parameter display
0: Invalid
1: Valid
0 -
★
It is used to set whether to display the parameters that are modified.
When it is set to 1, the parameters that are different from the default setting are displayed.
Groups E: Fault Details
Function
Code
Parameter Name Setting Range Default Unit Property
Group E0: 1st fault information
E0-00 1st fault code 0–6299 0 -
●
E0-01 1st fault subcode 0–65535 0 -
●
E0-02 1st fault month and day 0–1231 0 MM.DD
●
E0-03 1st fault hour and minute 0–2359 0 HH.MM
●
E0-04 1st fault logic information 0–65535 0 -
●
E0-05 1st fault curve information 0–65535 0 -
●
E0-06 Speed reference upon 1st fault 0.000–8.000 0 m/s
●
E0-07 Feedback speed upon 1st fault 0.000–8.000 0 m/s
●
E0-08 Bus voltage upon 1st fault 0–999.9 0 V
●
E0-09 Output voltage upon 1st fault 0–999.9 0 V
●
E0-10 Output current upon 1st fault 0–655.00 0 A
●
E0-11
Output frequency upon 1st
fault
0.00–99.99 0 Hz
●
E0-12 Output torque upon 1st fault 0–100 0 %
●
E0-13 Torque current upon 1st fault 0–655.00 0 A
●
E0-14 Output power upon 1st fault 0.00–99.99 0 kW
●
E0-15 Present position upon 1st fault 0.00–300.00 0 m
●