Programming the Electro Mechanical Timer
The electro-mechanical timer is fully automatic.
It uses a 12-day skipper wheel to activate the regeneration.
Fig 1
.
Fig 2.
Time of Regeneration
This has been pre-set to 2am. If Economy 7 electricity is used during the night, ensure that appliances do not use
water between 2 and 3.30am.
Alternatively, you can alter the regeneration time by loosening the centre screw then turn the REGEN TIME wheel
to the appropriate time and then retighten screw.
Time of Day
Turn the timer knob (k) anticlockwise until the correct time of day on the clock appears in the TIME OF DAY
window.
Days of Regeneration
With all skipper pins (E) pulled out, push in the pins as determined by the chart and details below relevant to your
installation.
Settings Chart
Family Size
Up to 30 drops
31-40 drops
41-50 drops
1 person
A
B
C
2 people
C
D
D
3 people
D
E
E
4 people
E
E
E
Pin Settings
A = push in pins 1 & 7
D = push in pins 1, 3, 5, 7, 9 & 11
B = push in pins 1, 5 & 9
E = push in all pins or consider larger softener with
C = push in pins 1, 4, 7 & 10
greater capacity/less frequent regenerations.
Finalise Commissioning
1.
Fill softener with tablet salt only, before you turn on the water supply.
Please advise customer to keep
the softener full at all times using tablet salt – see USER MAINTENANCE below…
2.
Close Bypass valve, then slowly open both Inlet and Outlet valve and allow softener to pressurise and salt
chamber to fill – approx 10 minutes.
3.
Check for leaks.
4.
Connect plug top and turn on power.
USER MAINTENANCE
The softener requires minimal maintenance. Simply keep the unit topped up with salt. The softener will require
topping up when or before you see water. We recommend that the softener be topped up twice a week. Never let the
salt go below the water level.
USE TABLET SALT IN EVERY INSTANCE
. Water softener guarantee becomes void if granular salt is used!
MONARCH WATER Ltd, HALESWORTH ROAD, BRAMFIELD, SUFFOLK, IP19 9HP. Tel 01986 784759. Fax 01986 784769
