Track-It™ Extreme Data Logger
is a trademark of
Monarch Instrument, all rights reserved.
1.0 INTRODUCTION
The Extreme Temperature (XT) Logger series consists of a self-contained
environmentally sealed (IP68) 316L Stainless Steel enclosure with one or
two temperature channels using probes of various con
fi
gura
Ɵ
ons. The
loggers are designed to measure temperatures from -50° to +150°C
(-58° to 302°F). The entire unit may be placed in the temperature environment.
The
fl
exible probe is capable of measuring temperatures from -70° to
+300°C (-94° to +572°F). (Probe only).
The units are programmed via software running on a
Windows PC. Communications is via a USB-A to MiniB
cable from PC to the READER that the logger is inserted
into. See section 3.0 for more on the READER.
Once programmed, the logger will record temperature from once every 2
seconds to once every 24 hours. Advanced temperature compensated
RTD technology allows for extremely accurate measurement with the
en
Ɵ
re logger in the temperature environment.
The Logger system and so
Ō
ware meets the FDA Regula
Ɵ
on 21 CFR Part
11 Requirements for Electronic Records, Electronic Signatures, and com-
plies with DIN ISO 17665 for moist heat (saturated steam) steriliza
Ɵ
on of
medical products.
2.0 GETTING STARTED
2.1 Install USB Driver and Track-It So ware
IMPORTANT: Do NOT plug the READER into the USB port un l AFTER
the USB Driver and Track-It So ware have been installed.
1
www.
.com
1.800.561.8187
