12
4.4 Tachometer (TACH) Mode
The TACH (Tachometer) Mode requires the Laser Module to be
installed OR an external input (sensor) be plugged in. This mode uses
the Laser or External signal to measure rotational speed.
Tachometer icon will show in display when the Nova-Pro is
in TACH Mode.
Note:
Unit will NOT FLASH in Tachometer Mode.
Laser icon will blink when Laser Mode is enabled and be
on solid when trigger is pulled and laser is on.
External icon will show in display when there is an external
sensor plugged into the Nova-Pro.
Pull the trigger and aim the laser (or external
sensor) at a reflective target. The speed will be
displayed in the selected units.
On-Target icon will show in display when target is detected.
The TACH can be configured to trigger on the positive or negative edge
of the incoming pulse from the external input (MENU-MISC).
Note:
Refer to Figure 7 - Using the Laser Module and the associated
warnings.
EXT
TACH
3600
RPM
TACH
MENU button
POWER button
On-Target Indicator
Joystick Arrows
Содержание Nova-Pro IR 850
Страница 35: ...30 This page intentionally left blank ...