Monacor Leuchtkraft 1000178, Инструкция по эксплуатации

Страница: 22 / 28

22
English
5) To activate the shade of white that has been
set:
a) Press the button MENU repeatedly until the
display indicates again .
b) Press the button DOWN twice so that the
display indicates .
c) Press the button ENTER . The display
changes to , , , ,
or .
d) Press the button UP or DOWN repeatedly
until the display indicates .
e) Press the button ENTER . If the display indi-
cates , the shade of white is activated;
if it indicates , use the button UP or
DOWN to set the indication to .
6) To be able to control the spotlight by DMX,
press the button MENU twice to return to the
highest menu level .
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .
5.3 LED response time
LEDs immediately respond to a change of the
brightness setting . To simulate the slow response
of standard lamps, the response can be set in
four steps . For the 13-channel mode
, the
setting is made via DMX channel 12 ( ☞ Fig . 5) .
When a different number of DMX channels is to
be used, make the setting as follows:
1) Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER . The display indicates
, , , , or .
3) Press the button UP or DOWN repeatedly until
the display indicates .
4) Press the button ENTER . The display indicates
the current setting:
= immediate response
= slightly slow response 1
= slow response 2
= slow response 3
= slowest response 4
Use the button UP or DOWN to select the
setting desired .
5) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level .
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .
5.4 Resetting the spotlight
to its factory settings
The factory settings of the spotlight are as follows:
Menu
item
Function Factory setting
number of DMX channels
= 13 channels
max. brightness
white balance function
subaddress function
LED response time
= 100 %
= slowest
subaddress 01
11 shades of white factory settings
white balance
R = 255, G = 255,
B = 255
DMX / independent mode
or slave mode
= DMX / inde-
pendent operation
Fig. 12 Factory setting
To reset the spotlight to its factory settings:
1) Press the button MENU repeatedly until the
display indicates .
2) Press the button ENTER . The display indicates
, , , , or .
3) Press the button UP or DOWN repeatedly until
the display indicates .
4) Press the button ENTER so that the display
indicates four entry positions ( . . . .) . Then press
the following buttons:
UP, DOWN, UP, DOWN .
Each time one of these buttons is pressed, an
asterisk ( ) will appear on the display .
5) To reset the settings, press the button ENTER
(the display briefly indicates ) or, to cancel
the procedure, press the button MENU .
6) To be able to control the spotlight by DMX,
use the button MENU to return to the highest
menu level .
For independent operation, use the button
MENU to select the operating mode and then
press ENTER to activate the mode selected .