Monaco Monarch 2000, Руководство по обслуживанию

Страница: 58 / 123

Close each faucet when it delivers a steady stream of water (cold water faucets first). The
pump is now ready for automatic operation. It will start when a faucet is opened and
stop once faucet is closed. Do not allow pump to run when the fresh water supply tank
is empty. Continued operation with a dry tank may open an electrical circuit and/or
damage pump. For more detailed information see manufacturer’s brochure in your
Warranty Information File.
City Water Hook-Up
When connecting your motorhome to city water be sure to use a hose manufac-
tured and labeled for potable water to insure that hose will not flavor water.
To Hook-up City Water
• Attach hose to CITY/FRESH WATER FILL connec-
tion on the water connection panel located in an
outside service compartment on the roadside of the
motorhome and to a water source.
•
Turn valve to LOCAL SUPPLY position.
• Shut off water pump on control panel.
•
Turn on water supply and open faucets to purge
any trapped air in water system.
Fresh Water Tank Fill
•
To fill tank, close tank drain valve and connect hose to CITY/FRESH WATER FILL
valve and to water source. Fill and drain valves are located in an outside water
connection panel compartment on the roadside of the motorhome.
•
Turn valve to FRESH WATER TANK position.
•
Turn on water and check level of tank on control panel while filling so tank does
not overfill. There is no automatic shut off on valve. There is an overflow drain
in the tank.
•
Shut off water and unhook hose when tank is full.
Monarch
4-2
W
W
ater Systems
ater Systems
M
ONACO
2000
!
CAUTION
!
Some water sources develop high pressure, particularly in mountainous
regions. High pressure is anything over 55 psi (pounds per square inch).
Excessive pressure can cause leaks in water lines and/or damage water heater.
Water pressure regulators are available to protect water system against high
pressures. See your dealer for information.