Monaco 2008 LaPalma XL, Руководство пользователя

Страница: 137 / 232

133
2 0 0 8 l a Pa l m a X l
water systems —
To Attach the Hose:
Remove sewer hose from storage.
Remove termination cap. Align coupler
tangs with termination tabs. Twist
coupler clockwise 90º locking coupler to
termination outlet.
Unscrew access port and feed the drain
hose through the opening.
Attach other end
of hose to drain
service. Restrain
hose to prevent
movement during
use.
Open the liquid
waste drain (grey
water) valve.
The solid waste drain (black water) valve
remains closed until the tank is full or until time
of departure to help prevent clogging. Use the
outside faucet or shower attachment for washing
or rinsing the sewer hose after dumping the
black tank.
NOTE:
Use care when connecting the sewer
hose adapter to the termination outlet in
cold weather.





NOTE:
Close the grey water valve 24 hours
prior to departing to allow the tank to
fill with liquid to help in the dumping
process.
LUBE:
Periodically lubricate the O-ring on the
sewer hose adapter with silicone spray.
Tank Flush
The motorhome comes equipped with a power
flush nozzle, located in the black tank to help
reduce solids build-up. Flush the black tank
each drain cycle. Failure to thoroughly rinse the
black tank may result in accumulated solids and
a clogged spray nozzle.
Gravity Drain Hose Dumping:
1. Attach sewer hose to terminal drain and
shore facility.
2. Prepare to dump the solid waste (black)
tank first. Close the liquid waste drain
(grey water) valve.
3. Fill the grey tank to at least 50% by
running water in the shower or sinks.
4. Use the monitor panel to observe tank
fluid levels. Stop filling when the grey
tank is 50% full.
5. Open the solid waste drain (black
water) valve. Allow the black tank to
drain.
6. Connect one end of the pressure
regulator to the water source and the
other end to a non-potable water hose.
Connect the non-potable hose to the
tank flush fitting.
7. Turn on the water source and allow
water to rinse the black tank for at
least three minutes. Never operate the
system unattended. Ensure the water
flows freely though the drain hose.
8. When completed, turn off the water
source and close the black water valve.
9. Open the grey water valve. The water
in the grey tank will flush remaining
solids from the hose. With the grey
water valve open, run two gallons of
water down any drain to flush grey
tank.The grey valve remains open
until the next drain cycle, or time of
departure.
WARNING:
Operating the flush system unattended
can risk flooding. Use the tank flush
system each time the holding tanks are
cycled. Failure to routinely use the flush
system will result in a clogged spray
nozzle. Turn off the water supply when
finished flushing the tank.
040460w
130013
040422j