Momon SPORT SEAT, Руководство пользователя

Страница: 19 / 32

FIRST USE MANUAL
The stroller along with the equipment is packed in the cardboard box. Individual
elements are packed in foil packaging. After unpacking the stroller and accessories,
children should not have access to the packaging. User manual along with the
warranty card, and other small accessories are in a carry bag. Stroller assembly and
each folding and unfolding should be carry out without presence of children.
SPORT VERSION
ASSEMBLY OF THE SEAT TO THE FRAME:
To assemble the seat to the stroller frame, place the nests of the fixing mechanisms
located on the frame vertically (fig. 1) and fix the seat into the proper openings, one
on each side of the stroller, until you hear the clicking sound (fig. 2). Check if the seat
is properly assembled pulling it upwards.
DISASEMBLE OF THE SEAT FROM THE FRAME:
To disassemble of the seat, pull handles on both sides of the seat at the same time,
and pull the seat upwards (fig. 3).
NOTE! To disassemble the seat, take the child out at first
SAFETY BELTS:
Sport version is equipped with 5-point safety belts. To secure the child with the safety
belts, put the ends of the safety belts to the main opening (fig. 4) and tighten the
belts. To release the belts, press the button in the centre of the main opening and
remove the fixing ends (fig. 5).
SAFETY BELTS ADJUSTMENT:
Safety belts are adjusted in 3 positions. Depending on the desired position, secure
the belts in proper opening (fig. 6).
ASSEMBLE OF THE BAR TO THE SEAT:
The bar is assembled to the seat sliding in the bar fasteners to proper openings on
both sides of the seat (fig. 7), until you hear the clicking sound (fig. 8). Before
assembly of the bar, place the crotch belt (fig. 9).
To disassemble the bar, press buttons located on the fasteners on both sides and pull
them towards yourself (fig. 10).
NOTE! Always use the bar along with the safety belt if the child is inside the seat.
SEAT FOOTMUFF:
Sport version is equipped with a footmuff, which can be assembled with 2 zippers to
the mattress (fig. 11). This was we obtain sleeping bad-mattress.
VENTILATION:
The sport version is equipped with ventilation. To open it, unzip the ventilation
fastener with use of the zipper (fig. 12).
EN
17