MoMi INVIDIA, Руководство пользователя

Страница: 9 / 20

9 EN
damaged and has no signs of wear, check that all connecting elements and fasteners fit well. Make
sure that the bolts and nuts retain their self-closing properties. Check that the set is complete and
undamaged. If you find that any parts are missing or damaged, do not use the product and contact
your seller.
• Be careful when using ride-on toys, driving skills are required to avoid a fall or collision that could
injure the user or a third party.
• The safest areas for riding a tricycle are areas with limited or disabled car traffic, such as: private
areas, playgrounds, school playgrounds, recreational areas.
• This product is intended for a single user with a maximum weight of 25 kg.
• Retain packaging or dispose of according to local regulations.
For the safety of children, do not leave freely accessible parts of the packaging (plastic bags, cartons,
etc.). Danger of suffocation!
• Check and maintain the bicycle regularly. Before each use of the bicycle, make sure that it is not
damaged and that no parts are missing or loose.
• Do not use the bike near bodies of water or other obstacles.
• Do not use the vehicle in the dark or in bad weather.
• It is forbidden to pull the bicycle behind a car or other vehicle.
MAIN PARTS:
1. Pushbar
2. Canopy
3. Rear basket
4. Safety belt
5. Handrail
6. Handlebar grip
7. Seat
8. Handlebar
9. Brake
10. Front basket
11. Fender
12. Rear wheel
13. Fork
14. Frame
15. Front wheel
16. Footrest
17. Pedal
ASSEMBLING PARTS:
1. Seat
2. Handrail
3. Front wheel
4. Front basket
5. Pushbar
6. Frame
7. Rear basket
8. Cup holder
9. Handelbar
10. Screw for seat
11. Canopy
12. Saddle
13. Rear wheels
PRODUCT ASSEMBLY:
1. Grasp the frame of the bike and the rear wheel, then point the needle into the appropriate hole in
the frame until you hear a click. Pull the wheel towards you while holding the frame to make sure the
wheel is properly installed and does not fall off the frame. Repeat the same operation for the other
rear wheel (fig. 1).
2. In the hole at the bottom front of the frame, insert the rack with the front wheel, pay attention to the
correct positioning of the pedals and fender. Then insert the handlebar from the top, pull it in the opposite
direction, making sure that it is properly installed and does not slide out of the frame (fig. 2 and 3).