D) USING THE CHRONOGRAPH
This chronograph is able to measure and display time in 1/20
second united up to maximum of 59min 59sec.
The chronograph 1/20 second hand keeps continuously for 30
seconds after starting, and then stops at Zero position.
“Measuring time with the stopwatch”
1. Press button “ A “ to start the chronograph.
2. The chronograph can be started and stopped each time button
“A” is pressed.
3. Press button “B” to reset the chronograph and chronograph
minute and second hands return to their Zero positions.
Reset
Time
Measurement
Stop
“A”
“A”
“B”
E) CHRONOGRAPH RESET
(INCL. AFTER REPLACING BATTERY)
This procedure shoud be performed when the chronograph
second hand does not return to the Zero position.
1. Pull the crown out to the 2nd Click Position.
2. Press the button “A” once to set the chronograph second
hand to the Zero position.
3. Press the button “B” once to set the chronograph 1/20
second hand to the Zero position.
* The chronograph hands can be advanced rapidly by
continuously pressing button “A” or “B”.
4. Once the hands are set at Zero position, reset the time
and return the crown to its normal position.
These specifications might be changed without prior notice.
