R / L
BEFORE FIRST USE
CHARGE THE BATTERY
• Insert the mains plug into an electrical socket and on the battery,
open the charging socket cover and insert the charger plug.
• The charger indicator light will turn red indicating that the
battery is charging; light will turn green when it is fully charged.
• Unplug the battery from the charger plug and close the
charging socket cover.
ASSEMBLE PEDALS
• Look closely at the pedals to identify the right and left
pedals.
• Using a
#15 spanner,
affix the
right pedal
by screwing it
clockwise to 30Nm into the right crank .
• From the left side of the bicycle, affix the
left pedal
by
screwing it anti-clockwise to 30Nm into the left crank.
‘M’ CHECK
• The M Check is a methodical check of the bike in the shape
of the letter M.
• It is good practice to do the M Check before every ride.
• If time is tight, at the very least, check the
brakes, tyres,
chain
and that the
key has been removed
before each ride
and do the M Check at least twice a month.
ADJUST SADDLE
• Use the
6mm hex key
to loosen the
seatpost clamp bolt
to adjust the saddle height.
• Sit on the bike saddle.
• Place one heel on a pedal and push down until it is at the
lowest position. Your leg should be straight.
• Place the balls of your feet on the centre of the pedal.
Your knee should be slightly bent. Tighten
seatpost clamp
bolt
to 10Nm.
ASSEMBLE HANDLEBARS
• The handlebar must be aligned with the front wheel.
• To do this, loosen the
handlebar clamp bolts
with the
4mm hex key
to adjust the handlebar angle.
• Move the handlebar to be at a perfect right angle to the wheel.
• Use the
4mm hex key
to tighten the
handlebar clamp
bolt
clockwise.
IN THE LITTLE BOX
• Battery charger
• 2 pedals
• #13 / #15 spanner
• 6mm / 5mm / 4mm hex key
• 2 AXA keys
