Document No: DELTA SIGMA-USM
Version 4
Revision 3.94.2
Page: 16 / 32
2.6
MEASURE NEW BOLT
When the
ACCEPT
button is pushed from Bolt Reading or Scope screen, the program returns to
the Bolt Info screen.
From here the entered data in each field can be inspected
by pushing the
Button at the end of each entry button.
The current Bolt can be read again by pushing the
MEASURE
button again, or a new bolt can be read by pushing the
displayed number button.
This will bring up the new bolt screen; the next bolt in
sequence will be queued, pushing the
OK
button will bring
the program back to the Bolt Info Screen.
Pushing the
NEW
button will bring the program to the New
Bolt Screen.
You can enter any numeric bolt # here and pushing the
ENTER
button will bring you back to the Bolt Info screen,
ready to read the new bolt. From here pushing the Bolt
Type: button, you can select or enter a new bolt type.
From the Bolt Info screen push the
MEASURE
Button and
read data on the new bolt. Repeat bolt data input process.
