Momax smart Ultra-Air Mist AP9S, Инструкция по эксплуатации

Страница: 11 / 35

Model No. : AP9S
Operating Voltage / Frequency : 100-240V ~50/60Hz
Adapter Power
: 60W, DC24V, 2.5A
CADR : 86.3m
3
/hr
Effective Area : Up to 37.5m 2 (Ceilling Height : 2.3m)
Filter Type : H14 HEPA
UV-C Lifecycle : 10000 hrs
Horizontal Oscillation : 80° ± 5°
Vertical Manual Adjustment : 30°
Wind Speed : 4.5 - 4.6m/s
Auto-off Timer : 1-8 hrs
Water Tank Capacity : 1.2L
Wireless Frequency : 2.402GHz - 2.480GHz (Wi-Fi + Bluetooth)
Wireless Distance : 10m (Wi-Fi)
Size : 815 x 225 x 225mm
Weight : 4.1kg ± 0.3kg
Contains
1. Ultra-Air IoT UV-C Purifying Fan
2. H14 HEPA Filter (1pc)
3. Remote Control (Button Cell Lithium Battery CR2025 (1pc) included)
4. Power Adapter (Cable Length : 1.8m)
5. Instruction Manual And Warranty Card
Specification
Points for attention
Before using, please read this user manual carefully and keep it for future
reference.
1. To avoid electric shock and fire, do not allow water, liquid or any
flammable detergent to get into or to clean the product.
2. Do not spray insecticide, perfume or other flammable sprays around
the product.
3. Before connecting the power supply, please check whether the
voltage of the product is consistent with the local power supply
voltage.
4. This product cannot replace daily air ventilation, dust collection, or
use as a fume cupboard.
5. Ensure the product is used and kept in a well-ventilated area.
6. Leave at least 30cm of space on the back and sides of the product
when using.
7. Ensure both the filter and its cover are properly installed before using.
8. Do not insert a finger or other things into the air outlet / inlet to
prevent physical damage or trouble.
9. Do not place the machine near a heating device such as a stove or
heater.
10. Do not attempt to repair, disassemble or modify this machine.
11. Please only use the correct local AC power outlet of the power
supply. Before connecting the product to the power supply, first,
verify that the voltage marked on the back or bottom of the product
matches the local voltage.
12. Remove the dust from the power plug and insert it all the way. If the
power cord or plug is damaged or found defective, to avoid danger,
it must be replaced by a professional from the manufacturer or
maintenance department.
Warnings
18 19