Moller Medical Docon Seal Скачать руководство пользователя страница 39

Страница: 39 / 68

Docon SealM

Docon Seal

Remedying of errors

Page 39 of 68

Errors

Solution

The Docon SealM will not
charge.

•

Check  the  connection  to  the  charger.
The  displays  on  the  charger  and  Do-
con  SealM  must  light  up  or  flash  or-
ange.

•

If the displays fail to light up or flash:
Check the charger and socket or use
a different charger.

•

Recharge the Docon SealM.

If the energy-saving mode
will not switch on or off

•

Make sure that the battery is fully
charged (Docon SealM).

•

Make sure that the Docon SealM is
disconnected from the charger once
the battery is fully charged.

•

Make sure that the device is con-
nected to the mains (Docon Seal
only).

Error due to moisture in the
plug connection.

Remove all plugs from the device and the
seal handle and allow the connections to
dry.

Damaged, illegible inscrip-
tions or labels

Please contact the

manufacturer ‘s service

centre or your local distributor.

Should you be unable to remedy the error, please contact your

Möller

Medical GmbH

service team or distributor.

Содержание Docon Seal





































































Результаты поиска

Содержание Docon Seal

Отзывы:

Похожие инструкции для Docon Seal

Бренды по названию

Популярные бренды

Moller Medical Docon Seal, Инструкция по эксплуатации

Результаты поиска

Содержание Docon Seal

Отзывы:

Похожие инструкции для Docon Seal

Бренды по названию

Популярные бренды