5. aSSEmBly Of ThE caBlE
STOPPEr
•
Thread the stopper onto the handset cable
and affix at a point on the steel security
hose.
•
The stopper position will determine the
maximum length of the extended cable
•
Test extended cable length and adjust if
required
important note:
!
We suggest that you begin assembly with the
Table-Stand and Roll Guide
4. aSSEmBly Of ThE TaBlE-STand
and rOll gUidE
•
Establish the position of the table-stand
•
Drill a cable hole with a minimum diameter
of 25mm through the centre of this position
•
To install the table-stand, use the provided
drilling template and M4 screws
•
Secure the roll guide to the furniture ceiling
as illustrated, centering the space between
the rollers under the cable hole
•
Carefully guide the handset cable through
the opening of the table stand and the
rollers underneath, and place the handset
on the stand
4
