Page 11 of 32
Main circuit board
The circuit board can be changed when
all settings and data for this lifter is cop-
ied from the old circuit board to the new.
If there is any trouble when copying the
settings, please send the lifter to Molift
AS or your dealer.
• Use the Molift Servicetool and copy to the
PC first, then connect to the new card and
download on request.
• Remove the battery and lifting arm with sus-
pension, and place the column on a table.
• Loosen the membrane panel (7) and open
the battery holder.
Bill of materials:
1
Material.
Comment.
Dimension/
Draw. no.
Description.
Qty.
Pos.
13-046 BOM.xls
I
I
I
3
2
23
6
7
4
8
10
17
El diagram
12
Remove paper tab from buzzer before assembling
13
14
F
G
18
Note for Pos 10 and 11!
Check height of extensions.
Height = 4x10 + 1x9 (Total = 49 mm)
11
G
19
22
21
20
H
H
A
A
SECTION A-A
SCALE 1 : 2
Assembly instructions 13-P03
J
Ref. EO 44 /2010
20.04.2010 RVS
RVS
I
Ref. EO 8/2010
14.01.2010 TES
TÅB
H
Add pos 19
20.11.2009 RVS
TÅB
G
Added pos 11, Pos 10 - 1 piece
03.09.2009 TÅB
MHL
F
Replaced pos. 14
18.12.2008
MHL
E
New emergency stop extender and
rearranged pos ballons
25.08.2008 RVS
MHL
D
Added label emergency stop
08.04.2008 RVS
T.B.
C
Changed dimensions due to new
emergency stop on PCB
27.09.2007
T.B.
B
Changed parts (13&14) due to new
emergency switch
25.04.2006
TB
A
Released for production
05.01.2006
MHL
Rev.
Description:
Date/Sign.
Approved:
20
1
1310145 Contact cover
19
1
1310144 Contac AMP
3-0640426-5
18
1
0920072 Molex Plug
44441-2002 Smart
17
1
Label safety check 13-224-A
16
2
Ø7/Ø6X17,
Thread Ø0.5
Spring battery probes
15
1
03-174
14
1
Label
0220307
13
1
Motorcable w/
stretchrelief
13-037
12
1
Cap 1S11-19,0
1310306
11
1
Extender 10mm
2S09-9,0
1310138
10
1
Plastic screw
PT 1452 40 X 16
9
2
Circlip DIN 471 - 8 x
0.8
8
1
13-094
7
1
Membraenpanel
13-060
6
2
Battery probe
13-053
5
2
LED guide
13-038
4
4
Extender 10mm
2S09-10,0
1310135
3
1
0920114
2
1
Lower mould
13-048
1
1
Upper mould
13-047
Pos.
New emergency
switch/QTY.
Description
Dimension/
Draw. no.
Material:
Comment:
Drawing name:
20.12.05
Drawing number:
Upper mould assy
Battery holder assy
A2
13-046
1:1
RVS
Projection:
Scale:
Date:
Designed/Drawn:
Size
• Pull the circuit board (6) carefully out and
loosen the cable connectors (5).
Take care of all extenders (10, 11) for the
emergency lowering button.
Replacing emergency stop button
• Unscrew the emergency stop (3) from in-
side. Take care of the extender (14).
• Pull the emergency stop button out an loos-
en the cable.
• Place a new emergency stop and connect
the cable.
• Make sure the extenderis in position. Tight-
en the emergency stop.
Mounting the circuit board
• Remove the paper tab on the buzzer before
mounting the circuit board.
• Connect all cables and place the circuit
board in the battery holder.
Make sure the LED’s are placed correct-
ly under the LED guides.
• Place the extenders (10, 11) for the emer-
gency lowering button.
• Close the battery holder.
• Place a battery in the holder and check.
• Attach a new membrane panel on the bat-
tery holder.
• Mount the column with lifting arm on chas-
sis.
• Test the lifter according to the safety control
test
Labelling
Check the labels - damaged labels are to be re-
placed.