INSTALLATION INSTRUCTIONS
Shielded DataGate Jack
Doc. # AS-18700-002, Rev C
Form # 315-234
Rev. Date: July 2008
SAP # 187000294
Molex Premise Networks
Corporate Headquarters
Tel: 1 866 733 6659
www.molexpn.com
European
Headquarters
Tel: 44 (0) 1489 572111
www.molexpn.co.uk
Pac Rim
Headquarters
Tel: 61 3 9971 7111
www.molexpn.com.au
Molex
Incorporated
Tel: 630 969 4550
www.molex.com
MOLEX PREMISE NETWORKS
This information is correct as at the time of publication, specifications are subject to change.
3
Fitting Can and Securing Cable (F/UTP)
3a.
Slide the rear can over the front can. Ensure that the two halves are latched
together
securely.
3b.
Ensure that sufficient foil and drain wire makes contact with rear metal collar.
Trim off excess foil.
3c.
Tighten the drain wire over the metal cable collar to maintain shield continuity.
3d.
Secure the cable with the plastic cable clamp, placed and tightened over the metal
cable
collar.
3
2k.
Ensure cables are trimmed off flush with IDC, if not use side cutters to remove excess
cable after termination.
