AT-1610 Head Crimp Tool
Doc No: ATS-640053500
Release Date: 09-05-05
UNCONTROLLED COPY
Page 7 of 7
Revision: D
Revision Date: 07-08-16
Air Powered
Crimp
Tool Head
Certificate of Calibration
Order No. 64005-3500
Engineering No. AT 1610
Tool Order Number_____________________
Tool Eng. Number______________________
Tool Revision_________________________
Serial Number________________________
Date of Manufacture____________________
Pin Gauge of Conductor Nest/Nests or Slug height if the nest is the “F” Crimp style.
Range Conductor Nest # 1 = ____________-- Actual = ______________
Technician ______________
Date of Calibration ______________
Calibration should be done every 5,000 cycles or 3 months.
Tools should be lubricated during this operation.
Application Tooling Support
2200 Wellington Court
Lisle, IL 60532 USA
Phone: +1-402-458-TOOL (8665)
E-mail: [email protected]
Visit our Website at www.molex.com/applicationtooling
