Molex – Advanced Sensor Mounting – Installation Guide
___________________________________________________________________________
_
___________________________________________________________________________
8/20/2020_Rev:
A
8
Gateway Connection
The other end of the wire harness goes into a Gateway, if it is a 5x2 connector (Molex part number 180887-
04XX or 180888-04XX). If it is a 2x2 connection (Molex part number 180777-04XX or 180778-04XX), then it
can connect to a driver or another sensor’s “Output”. Gateway, driver, and other sensors are supplied
separately. For more information on the wire harnesses, see data sheet 87651-5943
**Warning**
Do not hot plug the device. Make sure the gateway is disconnected and
powered off from POE power before connecting a sensor to CoreSync bus