Extractor Tool for Crimp Terminals
Doc No: ATS-638132700
Release Date: 11-07-07
UNCONTROLLED COPY
Page 4 of 7
Revision M
Revision Date: 09-01-09
EXTRACTOR
TOOL
TERMINAL
WIRE
LOCKING TANG
BEAMS
Figure 6
CONNECTOR
HOUSING
CONNECTOR
HOUSING
TERMINAL
EXTRACTOR
TOOL
WIRE
EXTRACTOR
TOOL
TERMINAL
LOCKING TANG
BEAMS
Figure 7
CONNECTOR
HOUSING
CONNECTOR
HOUSING
TERMINAL
EXTRACTOR
TOOL
Figure 8
EXTRACTOR
TOOL
HOUSING
50147-8*00 TERMINAL
LOCKING TANG
PUSHED UP
TERMINAL
PUSHED IN
For 43374 and 43375 Terminal Series:
1.
Push the terminal forward in the arrow direction before using the Extractor Tool as shown in Figure 6. Insert
the Extractor Tool into the slot on the side of the connector housing.
2.
Depress the terminal locking tang beams and push the terminal back through the connector slot.
Pull the terminated wire out in the arrow direction. See Figure 7.
For 50147 and 50148 Terminal Series:
1.
For terminal series 50147, push the terminal forward in the arrow direction before using the Extractor Tool.
2.
Insert the tip of the Extractor Tool on an angle into the connector housing. See Figure 8.
3.
While pushing the extraction tool against the terminal locking tang, bend the locking tang up and away from
the terminal. At the same time a second person pulls on the crimped wire to release the terminal from the
housing.
4.
For terminal series 50148, push the terminal forward in the arrow direction before using the Extractor Tool.
