molex 63811-9370, Техническое описание, Страница: 2 / 7

Hand Crimp Tool for MOX 0.635mm (.025") Receptacle Crimp Terminals
Doc No: ATS-6381193HM Release Date: 08-24-07
UNCONTROLLED COPY
Page 2 of 7
Revision: B Revision Date: 08-03-10
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
SEAM
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.
CRIMP SPECIFICATION
After crimping, the conductor profile should measure the following.
Terminal
Series No.
Wire Size Actual mm ² Wire Type
Conductor Profile AWG
Crimp Height (Ref) Crimp Width (Ref) 0.22-0.35mm
2
22 AWG
0.6-0.75mm 2
20 AWG
0.5mm 2
mm In. mm In.
98658
22 AWG 0.35 TXL 0.68-0.78 .027-.031- 1.40 .055 X
0.22mm ² 0.22 ID 0.68-0.78 .027-.031- 1.40 .055 X
0.35mm ² 0.34 IR 0.68-0.78 .027-.031- 1.40 .055 X
20 AWG 0.50 TXL 0.90-1.00 .039-.043 1.40 .055 X
0.60mm ² 0.59 IR 1.00-1.10 .039-.043 1.40 .055 X
0.75mm 0.79 ID 1.00-1.10 .039-.043 1.40 .055 X
0.50mm ² 0.50 ID 0.83-0.93 .033-.037 1.40 .055 X
0.50mm ² 0.50 IR 0.83-0.93 .033-.037 1.40 .055 X
Terminal Series No. Wire Size Actual mm ² Wire Type
Insulation
Pull Force Minimum
Crimp Height (Ref) Crimp Width (Ref)
mm In. mm In. N Lb.
98658
22 AWG 0.35 TXL 1.75 .069 1.90 .075 60.0 13.50
0.22mm ² 0.22 ID 1.75 .069 1.90 .075 50.0 11.24
0.35mm ² 0.34 IR 1.75 .069 1.90 .075 60.0 13.50
20 AWG 0.50 TXL 1.80 .071 2.00 .079 80.0 17.99
0.60mm ² 0.59 IR 2.15 .085 2.15 .085 80.0 17.99
0.75mm 0.79 ID 2.15 .085 2.15 .085 100.0 22.50
0.50mm ² 0.50 ID 1.70 .067 1.90 .075 80.0 17.99
0.50mm ² 0.50 IR 1.70 .067 1.90 .075 80.0 17.99
ΤΤΤΤ
Tool Qualification Notes:
1.
Pull Force should be measured with no influence from the insulation crimp.
2. The above specifications are guidelines to an optimum crimp.