Hand Crimp Tool for 1.25mm (.049") Pitch Crimp Terminals
Doc No: ATS-638110300
Release Date: 12-10-03
UNCONTROLLED COPY
Page 1 of 5
Revision: J
Revision Date: 04-14-08
INSULATION
CRIMP
BRUSH
STRIP
LENGTH
BELL
MOUTH
CRIMP HEIGHT
BEND
DOWN
BEND UP
ROLLING
CONDUCTOR
CRIMP
TWISTING
CUT-OFF
TAB
SEAM
HAND CRIMP TOOL
Operating Instruction and
Specification Sheet
Order No. 63811-0300
FEATURES
Ratchet with safety release that ensures consistent performance
Small handle spread which make this style tool ideally suited for end users
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
SCOPE
Products: 1.25mm (.049") Pitch PicoBlade™ Crimp Terminal, 28-32 AWG and 1.25mm (.049") Pitch Board-In
Crimp Terminal, 28-32 AWG.
Terminal Order No.
Wire Size
Insulation Diameter
Strip Length
Terminal
Series No. Loose Piece
Reel
AWG
mm²
mm
In.
mm
In.
50079-8100 50079-8000 39-00-0413
50079
50079-8153 50079-5053 39-00-0414
26-28 0.12-0.08 0.67-1.00 .027-.039 1.40-1.91 .055-.075
50080
50080-8100 50080-8000
26-28 0.12-0.08 0.67-1.00 .027-.039 1.40-1.91 .055-.075
50125
50125-8100 50125-8000
26-28 0.12-0.08 0.67-1.00 .027-.039 1.40-1.91 .055-.075
Customer to cut off terminal from reel: 0.15mm (.006”) maximum Cut-off Tab.
DEFINITION OF TERMS
The above terminal drawing is a generic terminal representation. It is not an image of a terminal listed in the
scope.