Page 8
6. Straight-Action (Short-Handle Type) Hand Crimp Tool Startup
Checklist
[Applicable Tool]
Straight-Action (Short-Handle Type) Hand Crimp Tool
“Note”
Please check the following matter before the commencement of work, and start operation
after checking those without a problem.
No. Checkpoint
Standard
Method/equipment
Check result
1 Crimp height of
conductor wire
When you crimp an applicable
terminal for the tool, the crimp
height of a conductor wire should
satisfy the standard.
Check by trial
crimping.
2 Wire pullout
strength
The wire pullout strength of an
applicable terminal should satisfy the
standard.
Check by trial
crimping.
3 Separation of
ratchet
When squeeze a tool handle firmly, a
ratchet should crick and separate.
Check by trial
operation.
4 Crack of terminal
There are no crack and deformation
by the hand tool in a terminal.
Check a crimped
terminal visually.
5 Crimp
section
There are no article and dust in a
crimp section.
Cleanup
Wire strip length
Insulation crimp height (reference)
Conductor crimp height
Extrude wire length
Measurement of crimp
height of conductor wire