APPLICATION SPECIFICATION
LANGUAGE
ENGLISH
REVISE ON PC ONLY
TITLE:
CLIK-Mate 1.5
SINGLE ROW CONNECTORS
APPLICATION SPECIFICATION
C
SEE SHEET 1 OF 21
THIS DOCUMENT CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX ELECTRONIC
TECHNOLOGIES, LLC AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION
REV.
DESCRIPTION
DOCUMENT NUMBER
AS-502578-002
FILE NAME
AS502578002.DOC
SHEET
18/21
EN-037(2015-11 rev.1)
8-2
．
Recommended removal
Hold the wires together, attach your fingers to the side without the lock and push the positive
lock on the sides.
When confirmed that the lock is released,
pull the connector upwards.
※
Please hold all wires equally to prevent excessive force on certain wires. Excessive force
could lead to damage.
※
When you press the lock removal bar, use your finger cushion and not the tip of your fingers,
to avoid nail damage injury.
※
When removing the lock, be sure to unlock completely. This connector is designed so the
connector does not unlock when the positive lock is in effect. When you try to pull the
connector with the positive lock is in effect, the connector will break.
NOTE
The lock release bar is pushed only
by the tip of a finger.
The lock release bar is
pushed flat of the finger.
〇
×
The lock release bar
The side without
the lock
