Hand Crimp Tool for Micro-Lock Plus 2.0mm Pitch Wire-to-Board Receptacle Crimp Terminals
Doc. No: 20021845HM
Release Date: 01-16-19
UNCONTROLLED COPY
Page 6 of 7
Revision: A
Revision Date: 01-16-19
APPLICATIONS FOR THE MODULAR CRIMP HEAD
WARNING:
NEVER
operate, service, install or adjust this modular crimp head without proper
instruction and without first reading and understanding the instructions in the proper manual
or specification sheet. See chart below for the correct manual or specification sheet.
WARNING:
NEVER
install tooling or service this tool while it is plugged into any power
source. Disconnect the power by unplugging, or turn off the actuator from its power source.
CAUTION:
Keep fingers away from the crimping area when operating this tool. It may cause
severe injury.
CAUTION:
Wear safety glasses when operating or servicing this tool.
The chart below shows all applications for this modular crimp head:
Tool Order No.
Tool Description
Adapter Order No.
Adapter Description
Figure No.
63816-0000
Hand Crimp Frame (Short)
—
—
7
63816-0050
Hand Crimp Frame (Long)
—
—
7
63816-0270
Battery Power Tool (110 V)
63816-0600
Battery Power Crimp Adapter
8
63816-0280
Battery Power Tool (220 V)
63816-0600
Battery Power Crimp Adapter
8
63816-1500
Electric Crimp Machine
63816-0600
Battery Power Crimp Adapter
9
Applications for the Modular Crimp Head
Hand Crimp Tool
Battery Powered Tool
Electric Crimp Machine
Figure 7
Figure 8
Figure 9
MODULAR
CRIMP
HEAD
LOCKING
PINS
HAND CRIMP
FRAME LONG
OR SHORT
MODULAR
CRIMP
HEAD
BATTERY
POWERED
CRIMP
ADAPTER
LOCKING
PINS
LOCKING
PINS
BATTERY
POWERED
TOOL
ELECTRIC
CRIMP
MACHINE
MODULAR
CRIMP HEAD
BATTERY
POWER CRIMP
ADAPTER