Molecular Devices QPix 420, Руководство пользователя

Страница: 173 / 225

Chapter 14: Rearraying Processes
5031496 G 173
Running Rearraying Processes
After a rearraying routine has been configured, you can run the process on the instrument. If
you have not configured the rearraying routine to run, you must create a new rearraying routine
or edit an existing routine.
Note: Before you run a rearraying process, it is important that you do the cleaning and
set up procedures in
Preparing to Run Processes on page 27 .
Some steps that are included in these procedures might not be available, depending on the
features included with the instrument and license.
To run a configured rearraying routine:
1. Open the Rearraying window.
2. Select the rearraying routine you want to run.
To not make changes to the routine, select the Skip Steps check box before clicking Next.
3. Review the settings for the routine.
4. In the Settings Summary window, click Next.
5. In the Continue or Save New Routine dialog or the Save Changes to Routine dialog, select
whether or not to save the routine before continuing with the rearraying process.
If you create a new routine, the Continue or Save New Routine dialog displays.
To save the settings for the routine before continuing, click Save Routine, enter a
Name and a short Description for the routine, and then click Save.
To continue without saving the settings for the routine, click Routine Without Saving
and then click OK.
If you edit a routine, the Save Changes to Routine dialog displays.
To save the settings for the routine before continuing, click Save.
To save the settings as a new routine without changing the existing routine, click Save
As, enter a Name and a short Description for the routine, and then click Save.
To continue without saving the settings for the routine, click No.
6. Make sure that the instrument door is closed.
7. Click Next to run the replication routine.
8. The Rearraying Progress window displays.