Molecular Devices GenePix 4300A, Руководство пользователя

Страница: 18 / 36

Installation
18 0112-0173 B
To unpack the scanner and position it on the bench
1. Open the crate and remove any foam blocks used to protect the
scanner from excessive shock and vibration during shipping.
CAUTION! Do not touch or loosen any screws or parts other than those
specifically described in the instructions. Doing so may cause
misalignment and voids the scanner warranty.
2. Lift the scanner using the molded lifting handgrips, and then
place the scanner on a flat level surface, away from direct
sunlight, dust, drafts, vibration, and moisture. Carefully move
the scanner to its final position.
Note: Do not tilt or slide the scanner when transferring it from
the crate to its final position on a bench or desk.
Table 2-1 Lifting handgrips
Item Name Description
1 Lifting handgrip Lifting handgrips are molded into
each side of the base of the
protective enclosure
1
1
GenePix.book Page 18 Friday, October 22, 2010 2:59 PM