Molecular Devices Digidata 1550, Руководство пользователя

Страница: 7 / 39

5023399 A 7
2
Installation
The following procedures install the new software and drivers parallel to
previously installed hardware and software, allowing you to continue to
use the earlier Digidata
®
1200, 132x, or 1440A Series digitizers and earlier
versions of AxoScope or pCLAMP software. However, if you no longer use
older installed digitizers and corresponding software, uninstall them
before you begin the following new installation procedure.
Installation involves procedures in the following order:
1. Installing AxoScope or pCLAMP Software
2. Installing the pCLAMP Security Key (pCLAMP Only) on page 8
3. Installing the Digidata 1550 Digitizer on page 8
4. Configuring Software for Digidata 1550 Digitizer Use on page 8
Installing AxoScope or pCLAMP Software
Install the AxoScope 10.4 or pCLAMP 10.4 software, which includes the
Digidata 1550 digitizer drivers. An AxoScope 10.4 software CD is
included. If you have purchased the pCLAMP 10.4 software, install it
instead of AxoScope 10.4 software.
1. Insert the AxoScope 10.4 or pCLAMP 10.4 software CD into your
computer’s CD-ROM drive.
2. The setup dialog is displayed automatically; if not, use Windows
Explorer to open the CD directory and double-click the
AxoScope_10_4.exe , or pCLAMP_10_4.exe file. The installation
menu appears.
3. Follow the on-screen instruction to install the software.
Note: Before installing the software from a CD-ROM, verify on the
Molecular Devices support web site it contains the latest version. If you
do not have the latest version, you can download it from the support
web site
www.moleculardevices.com/support .