Molecular Devices AquaMax 2000, Руководство пользователя

Страница: 53 / 158

Operation: The Touch Screen Interface
0112-0151 K 53
FastWash Settings
The FastWash step is designed for rapid microplate washing using
multiple aspirate-dispense cycles with predefined parameters. FastWash
performs a final aspiration after the last cycle. All aspirations use a rate of
5 and a fast descent speed. See
Table 4-11: Aspiration Rates .
Table 4-14: FastWash settings
Item Description
1 Inlet–Liquid to be used for this step.
The available options correspond to the color-coded reagents
connected to the washer.
2 Prompt–Indicates that the system will pause before dispensing and
wait for the user to specify an inlet.
3 Rate–Dispense rate.
See
Table 4-9: Plate Wash and Cell Wash Dispense Rates .
4 Volume–Volume of wash fluid to be dispensed per well in each cycle.
Use 5 to 150
μ L for 384-well plates and 20 to 400 μ L for 96-well
plates.
5 Cycles–Number of times the volume is dispensed.
6 Dwell Time–Duration in seconds (0 to 30) that the probe rests at the
final probe position. The default value is 1 second.
7 Probe Height–Final probe height above the bottom of the well during
aspiration.
The range for plate wash heads is 0 mm to the top of the well.
1
4
3
6
2
5
7