MOKO TECHNOLOGY LTD.
MKL62ST-DT User Manual
www.mokosmart.com
@Copyright 2019 MOKO All Rights Reserved
Notes:
After con
fi
guring the network join parameter, the user must reset the MKL62BA,
otherwise MKL62BA will not be able to join the network. If the user reads the default
parameters of the module and uses the default parameters to join the network, there is no need
to reset MKL62BA.
3. Register the module as an end device in the LoRa server and ensure that all the
parameters are correct. Send a network join request and get JOINED response. You
can see from the screenshot below that the module has established a connection
with the LoRa server.
For more AT Command applications, please refer to AT Command Speci
fi
cations:
<MKL62BA AT
Command>
6.2 Host Mode
In the host mode, users can download their own
fi
rmware to the SMT32 on the development
board or use an external MCU through Arduino interface to achieve communication with the
MKL62BA LoRaWAN module. The standard MKL62ST-DT has built-in MOKO DEMO application.
Let
’
s take MOKO
’
s DEMO application firmware as an example to demonstrate the uplink data of
temperature and humidity transmitted through the LoRa network. The following are the specific
steps.
