LW004-CT
6 www.mokosmart.com
second, then Solid Blue
and keep one second.
3 Device Feature and Function
3.1 Introduction to Device Application
3.1.1 Contact Tracing
LW004-CT is commonly used for contact tracing in schools, hospitals, companies, factories and
other densely populated areas. The close contact information can be used for surveillance and
early warning When a major public health event occurs.
When the device is powered on and normally connected to the network, the device will report
Contact Tracing Payload
at fixed intervals (Interval time can be set).
Note:
Users can choose whether to include location information in the Contact Tracing Payload. If
location information is included, users need to install the location beacon in advance.
Example of corporate office scenario:
➢
All employees should wear the LW004-CT, and install the fixed location beacon (Take Moko
beacon product H2 as an example) on the corresponding location in the office area to ensure
that the Bluetooth broadcast range of these Bluetooth Beacons can cover the whole office.
➢
By setting the broadcast information of LW004-CT & H2 and the filter condition of LW004-CT,
you can successfully ignore the unneeded Bluetooth device data, and you can set the
determination distance of close contact. (Refer to
Chapter 7
for an example of how to set the
filter condition)
➢
In case of close Contact between employees wearing LW004-CT, each employee's LW004-CT
will record this close contact.
Contact Tracing Payload
will be reported in turn after reaching
the reporting time point.
➢
Since each LW004-CT has a unique MAC address and the installation location of H2 is known
in advance, by analyzing the
Contact Tracing Payload
, the user can obtain the information
about the person in close contact, when the close contact occurred and the approximate
location where the close contact occurred.