Mokai ES-KAPE 2.0, Руководство пользователя, Страница: 15 / 19

15
Engine Storage/Transport
It is important for the engine to remain upright during storage or transport.
Tipping the engine more than 30 degrees (carburetor moving towards the
floor) for a prolong period of time will result in oil seeping past the reed valve
in the value cover. Oil will then travel thru the engine vent line into the intake
manifold. When the engine is up righted this oil could stop the engine from
rotating and/or starting
You must take the following corrective action.
Corrective Action

Remove Spark Plug

Pull starter cord to cycle engine– excess oil will blow out spark plug hole.

Dry spark plug and re-install.

Remove air filter and clean with soap and water. Squeeze dry.

Wipe excess oil from air box.
Contact with Salt water
After use in a salt environment we recommend rinsing all areas of contact
with fresh water. Also, remove the engine and rinse the exterior for any salt
spray that may be present on the engine. Apply a light spray of corrosion
block to exterior of engine and linkage. Remove the jet drive and rinse.