Instructions for Remotes without Mode Switch
This remote transmitter has a telescoping antenna and MOJO embossed in the receiver. (For
identification purposes)
First - Make sure your
battery is fully charged
to approx. 7.25 volts. Remote will not operate
under 3 volts.
Reprogramming your remote:
Simply disconnect the positive wire (red wire) from your battery for 30 seconds. Now connect
positive wire back to battery and press the (on) button on your transmitter. If motor does not
operate push the on/off button under the tail of your duck.
Important
Note: The receiver and transmitter are not waterproof and must be kept dry.
At the end of operation, turn your decoy off using the remote control. DO NOT turn the decoy’s
on/off switch off. Otherwise, it will continue to drain your battery.
