background image

INTRODUCTION

 

Congratulations  on  your  purchase  of  a  Mojave  Audio  MA-37  Multi-pattern  Vacuum  Tube 
Condenser  Microphone.  Your  MA-37  was  carefully  designed  and  constructed  using  only  the 
finest  materials.  The  MA-37  microphone  is  capable  of  delivering  superb  performance  and, 
with minimal care, will do so for many years. Your MA-37 was thoroughly tested and given a 
24-hour factory burn in prior to shipment.

 

The MA-37’s capacitor capsule and electronics are adapted from mid-1950’s design practice. The 
MA-37  utilizes  a  European-made  EF-86  vacuum  tube  and  a  Lundahl  audio  output  transformer 
wound to our specifications. By utilizing modern components, the microphone system emulates 
the performance of “classic” tube microphones without using esoteric, unreliable, or hard to find 
components.

 

The  MA-37  is  guaranteed  to  perform  as  specified  and  is  suitable  for  recording  even  the  most 
demanding music, provided that the microphone is used sensibly.

 

For  optimum  performance  from  your  microphone,  please  read  this  manual  thoroughly  and 
familiarize yourself with the proper use of the MA-37.

 

UNPACKING AND INSPECTION

 

Carefully  unpack  your  MA-37  and  verify  that  all  of  the  accessories  included  with  the 
microphone are accounted for. Do not discard any packing materials! If anything is missing or 
damaged, contact your dealer or Mojave Audio immediately.

 

Items included with the MA-37 are:

 

1. MA-37 microphone inside a pelican-style carrying case.

 

2. AC operated microphone power supply.

 

3. 20-foot premium microphone cable with 5-pin male and female connectors.

 

4. AC power cable for power supply - molded IEC business machine type with plug.

 

5. Rugged carrying case for all above items.

 

Verify that the serial number of your MA-37 matches correctly with the one on your receipt. The 
MA-37  serial  number  can  be  found  on  the  silver  ring  found  just  above  the  base.  When 
corresponding with Mojave Audio about your microphone or when service is required, we will 
need to know the serial number, so keep it handy. 

Содержание MA-37










Отзывы: