background image

INTRODUCTION

Congratulations  on  your  purchase  of  a  Mojave  Audio  MA-1000  Multi-pattern  Vacuum  Tube 
Condenser Microphone. Your MA-1000 was carefully designed and constructed using only the 
finest  materials.  The  MA-1000  microphone  is  capable  of  delivering  superb  performance  and, 
with minimal care, will do so for many years. Your MA-1000 was thoroughly tested and given a 
24-hour factory burn in prior to shipment.

The MA-1000’s capacitor capsule and electronics are adapted from mid-1950’s design practice.  
The MA-1000 utilizes a U.S. made, military-grade, low noise sub-miniature vacuum tube and a  
Coast  Magnetics  audio  output  transformer  wound  to  our  specifications.  By  utilizing  modern 
components,  the  microphone  system  emulates  the  performance  of  “classic”  tube  microphones 
without using esoteric, unreliable, or hard to find components.

The MA-1000 is guaranteed to perform as specified and is suitable for recording even the most 
demanding music, provided that the microphone is used sensibly.

For  optimum  performance  from  your  microphone,  please  read  this  manual  thoroughly  and 
familiarize yourself with the proper use of the MA-1000.

UNPACKING AND INSPECTION

Carefully  unpack  your  MA-1000  and  verify  that  all  of  the  accessories  included  with  the 
microphone are accounted for. Do not discard any packing materials! If anything is missing or 
damaged, contact your dealer or Mojave Audio immediately.

Items included with the MA-1000 are:

1. MA-1000 microphone inside an aluminum style carrying case.
2. AC operated microphone power supply.
3. 20-foot premium microphone cable with 7-pin male and female connectors.
4. MA-1000 shock mount and European adapter (fitted to shock mount).
5. AC power cable for power supply - molded IEC business machine type with plug. 
6. Rugged carrying case for all above items.

Verify that the serial number of your MA-1000

 

matches correctly with the one on your receipt. 

The MA-1000 serial number can be found 

 

on the silver ring found just above the base. When 

corresponding with Mojave Audio about your microphone or when service is required, we will 
need to know the serial number, so keep it handy.

Содержание MA-1000











Отзывы: