mogk PTP 1450, Руководство пользователя

Страница: 31 / 33

31
15.4.1 Tradution - Digital Controller
The Temperature Controller with Proportional is developed to obtain accuracy in temperature
and time control simultaneously.
The temperature on the thermocouple is continually checked and compared with the set value,
when the value is below the set temperature, the heating relay performs accordingly to the
preset values (P03, P04)
– on and off respectively.
Description of each parameter of the controller after briefly pressing the button PGm:
Display Description
SET Setpoint adjust (Celsius) Range: 0
– 700oC
Tem Timer Adjustment
– Range: 1 – 999 seconds
Description of each parameter of the controller after simultaneously pr/- 10 s
Display Description
SEn Password
– Access Parameterization (123)
P00 Offset value - temperature indication collected by the sensor
P01 Control Hysteresis (Celsius)
Adjustment Ranges: 1-40 celsius. Adjust in 1oC
– Controller Proportional mode
2
– 40oC controller in mode on/off (Standand 1oC)
P02 Start value of proportional control (0oC)
Adjustment Ranges: 0
– 250oC (Standard = 1oC)
P03 Working Time for output control (sec)
Adjustment Ranges: 1-250 sec. (Standard = 3 seconds)
P04 Non-working time for output control (sec)
Adjustment Ranges: 1-250 sec. (Standard = 1 second)
P05 Limit of temperature range
Timer
When the limit switch is activated, the timer starts to operate. In this case, the time ralay stays
closed while the display shows the remaining time. By the end of the temporization, the time relay
opens its contact and the equipment gives a sound alarm whilst the temperature is flashing on
the display. To go back to normal operating mode, disable the timer limit switch.