18
Truss Rod Adjustment
(Only Acoustic Model)
•If the neck is bent, adjust the truss rod to correct the neck.
•The truss rod of this product is adjusted using a 4mm hexagon wrench.
•The bend of the neck supposes to be slightly concave. Turning the nut clockwise tightens the rod and adjusts se-
vere convex curves.
•Adjust gradually. Please take 5 to 10 minutes of setting time, and check the bend every time by turning the truss
rod nut half a turn.
•It is recommended to ask the professionals or the guitar store to adjust the truss rod.
Convex
Concave
In the case of severe convex
In the case of severe concave
String Replacement
CAUTION
•Do not place your face near the instrument when adjusting or replacing strings. The string may break accidentally
and damage your eyes.
•When replacing a string by cutting it, loosen enough the bobbin before cutting it.
•If the tight string breaks suddenly, the neck of the guitar may be damaged as well as serious injury may result from
the bouncing string.
•A pickup that responds to string vibrations is installed under the saddle.
•Replace the strings one at a time to prevent the pickup position from shifting.
In the case of a classical guitar, if a string is not for the field which is 580mm (3/4 size), the tension is too
weak to obtain sufficient resonance. Please make sure to use a suitable string.
