User Manual v1.0
Page 41
of 59
4. Enter the SSID of the main router you are trying to connect to and the wireless password. You can select this
from the box. If you are unable to select this, click on the Wifi Bridge/Repeater on the left hand side again to
refresh that screen.
5. Under repeater mode, change it to ENABLED and enter the SSID that you want to use for the repeater router. For
the wifi security, select WPA2-PSK and then enter the wifi password that you want to use for the new router.
6. When completed, click on save,
It should take 1 min for settings to be saved.
After it is saved, you should reboot the router by taking the power off and then one again.
After router comes back up, you should have internet access off it.
If you are having issues, go back to the wireless bridge/repeater section and go to the bottom and click on the
button “Press Here To Update Wifi Profile if Unable to Connect”
After you do that, best to reset the router by going to system in the basic mode then factory default and do a
factory default and start over again.
You can use this for example to supply internet to multiple devices connected to the Ethernet port and this is a
great way if you want for example to connect your DVD Player, TV, or other device to the internet without having to
run network cables in your living room.
For many customers, you might want to use this wireless repeater to boost the signal in different parts of your
house like the basement.
