Moffat turbofan E25, Руководство по обслуживанию, Страница: 29 / 51

Revision 6/F3501
© Moffat Ltd, August 2006 E25 Convection Oven -29-
7) Adjust the calibration nut located at the
base of the thermostat shaft.
To increase oven temperature, turn
calibration nut anticlockwise.
To decrease oven temperature, turn
calibration nut clockwise.
Adjustment of the calibration nut by 1°
angular will alter oven temperature by
approximately 2°C (3.6°F).
8) Reassemble broil switch onto thermostat
and fit assembly back onto control panel.
9) Turn on power and recheck oven
thermostat calibration.
10) Repeat procedure if necessary.
Figure 6.4.5
Calibration Nut
6.4.3 DOOR MICROSWITCH ADJUSTMENT
1) Open oven door.
2) Open control panel (refer 6.2.1).
3) With fingers, bend actuator arm of
microswitch so that switch operates when
door is in closed position.
Screws
Broil Switch
Figure 6.4.4
Actuator Arm
Figure 6.4.6
6.4.4 60 MINUTE TIMER ZERO POSITION
ADJUSTMENT
1) Remove 60 minute timer knob by pulling it
firmly away from control panel.
2) Open control panel (refer 6.2.1). Loosen
two screws on control panel holding 60
minute timer.
Figure 6.4.7
3) The timer can now be rotated as required
to ensure that the buzzer sounds at the
zero position.
Two Screws