Moffat MCH 665, Инструкция

Страница: 11 / 16

11
INSTALLING THE COOKER HOOD
Please ensure that when the appliance is
installed it is easily accessible to an
engineer in the event of a breakdown.
All installations must comply with
the local authorities requirements
for the discharge of exhaust air.
Incorrect installation may affect the
safety of this cooker hood.
Installation Requirements
Before installation check the wall to
which the cooker hood is to be
fitted for electric cables, water or
gas pipes.
If it is necessary to fix the hood to a hollow
construction plaster or partition board
structure then it should be sufficiently
reinforced to be quite rigid in the area of
the cooker hood keyhole fixing screws, and
the appropriate rawl plugs used for this
type of fixing (not supplied).
Ducting
The ducting must be fire retardant 125mm
(5ins) in diameter and the length should be
no more than:
3 metres with one 90 ° bend
2 metres with two 90 ° bends
Bends of more than 90 ° will reduce the
efficiency of the hood and reduce the
airflow.
Clearance Height
The cooker hood is designed to be fitted
over a cooking appliance at the clearance
heights stated, providing the maximum
output of the appliance beneath does not
exceed the maximums quoted in the
Technical Specifications.
If the output of the appliance below the
cooker hood exceeds the maximum output
quoted, please refer to the cooker
manufacturer ’s installation instructions.