To check the unlocking record:
A record is shown in two screens, the first screen displays
date message, the format is “YYMMDD”, YY is year, MM is
month, DD is day, the second screen shows the time message
and opening method, the format is “hhmm-x”, hh is hour, mm
is minute, x is as following:
1 - open by administrator
7 - open by CEU
8 - open by guest code
9 - open by override key
In the administrator mode:
a.
Input operating code “09”, press “Enter”
b.
The first screen message of the latest record is shown
At this time the key function is as followed:
2 - to previous record
8 - to next record
4 - to the first screen of a record
6 - to the second screen of a record
5 - to the latest record
C - to exit browsing record
Other key - factory reserved.
To exit administrator mode:
When the screen displays “CC--” press “Cancel”.
Forget the administrator code
a.
Open the safe with mechanical key or guest code;
b.
Remove the back cover of the door;
c.
Press and hold “RESET” button in control board;
d.
Wait for about 7 seconds until screen displays
“RESET”, release the button;
e.
Install the back cover of the door, the administrator
code is restored to “000000”;
f.
Please refer to Usage for administrator
2 to modify
administrator code.
