Moeller XION-PLC-CANopen Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 54

background image

Engineering

02/05 AWB2724-1566GB

16

Lighting protection

External lightning protection

All cables routed outside buildings must be shielded. Metal
conduit is best for this purpose. Fit signal cables with overvoltage
protection, such as varistors or other surge voltage protectors.
Where possible, protective elements should be fitted at the point
of entry of the cable into the building, but no further away than
the control panel.

Internal lightning protection

Internal lightning protection covers all measures to reduce the
effects of a lightning strike and the resulting electrical and
magnetic fields on metallic installations and electrical plants.
These measures are:

• Equipotential bonding/earthing
• Shielding
• Using overvoltage protection devices

Please consult the following manuals for advice on cable routing
and shielding measures:

• AWB27-1287 “EMC Engineering Guidelines for Automation

Systems”.

• TB27-001-GB “Electromagnetic Compatibility (EMC) for

Automation systems”.

• TB02-022-GB “Electromagnetic Compatibility (EMC) for

Machinery and Plant”.

Connecting system and field voltage

Connect the system voltage at terminals U

Sys

and GND

Sys

, and the

field voltage at terminals U

L

and GND

L

. Use separate power supply

cabling for the system and field voltage.

You do not need a separate power source for the system and field
supply.

Table 5:

Rated values for the XN-PLC’s system and field voltage

You can connect up to 74 XI/ON modules in slice design to the XN-
PLC. The power consumption of all modules must be less than the
supply current supplied by the XN-PLC. If current consumption is
higher, you can use additional modules for power supply, for
example a bus refreshing module or a power feeding module.

Bus refreshing modules supply the built-in module bus with
5 V DC and the XI/ON modules with 24 V DC.

Power feeding modules supply the XI/ON modules with the field
voltage of 24 V DC. A further module type provides 120/230 V AC.
You can use these modules create groups of different potentials
within the PLC. The 120/230 V AC modules can be arranged
immediately to the right of the XN-PLC.

For configuring the PLC, please refer to manuals “XI/ON: Digital I/
O Modules and Supply Modules” (AWB2725-1533GB) and “XI/
ON Gateways for CANopen” (AWB2725-1530GB).

Figure 14:Terminals for system and field voltage

U

Sys

GND

Sys

U

L

GND

L

Rated system
voltage

24 V DC

0 V DC

Rated field
voltage

24 V DC

0 V DC

U

Sys

GND

Sys

U

L

GND

L

Figure 15:Rating of XI/ON module supply

XN-PLC

XI/ON module bus 1.5 A/5 V DC

XI/ON field voltage 10 A/24 V DC

U

Sys

24 V DC

U

L

24 V DC

«
...
18
19
20
21
22
...
»

Содержание XION-PLC-CANopen























































Отзывы:

Нет отзывов

Похожие инструкции для XION-PLC-CANopen

Бренд: ABB Страницы: 11

Бренд: Eagle Eye Power Solutions Страницы: 2

Бренд: Eaton Страницы: 2

Utility Electric Bike

Бренд: Daymak Страницы: 27

Бренд: Grundfos Страницы: 43

Бренд: UNITED Страницы: 45

Бренд: VEMAG Страницы: 167

Бренд: Syntron Material Handling Страницы: 7

Бренд: Goodwe Страницы: 33

Бренд: Parker Страницы: 52

Бренд: PI Страницы: 42

Бренд: B&R Страницы: 28

Бренд: Advanjet Страницы: 30

Бренд: OEZ Страницы: 4

Бренд: Rupes Страницы: 36

Бренд: ABB Страницы: 80

NOVATEC VL Series

Бренд: MAGUIRE Страницы: 26

Бренд: MBM Страницы: 40

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды