Moeller ps4-201-mm1, Аппаратное обеспечение и инженерия

Страница: 40 / 94

Software Configuration
36
04/
99 AW
B
27-
1184 G
B
Topology configuration
procedure Each Suconet K line in an automation system is
assigned to a single master. All the other stations on
the master’s line are slaves. A separate configuration
must be defined for every station with its own CPU,
i.e. for the master itself and for all intelligent slaves.
Configuration of the master with local expansion
modules
The master’s configuration also specifies the local
expansion modules. Local expansion modules are
assigned the same line number and station number
as the master (“0” for both line and station number).
The modules are numbered consecutively. The
master is module number “0” and the local
expansion modules are numbered “1” to “6”.
Configuration of the master with remote
expansion modules
The master’s configuration also specifies the slaves
that are connected to the master’s line. The slaves
are classified according to whether they have their
own CPU (intelligent slaves) or not (slaves for
expanding the remote inputs/outputs):
In the case of intelligent slaves (e.g. PS4-200)
the master configuration only specifies the device
itself, and not any local expansion modules
(LE4...) that are connected to it.
In the case of slaves for expanding the remote
inputs/outputs the connected local expansion
modules (modules 1 to 6) are specified in the
master’s configuration file as “network stations”
in addition to the base module (module 0).