manualshive.com logo in svg

Moeller PS 416-BGT-4 Series, Аппаратное обеспечение и инженерия, Страница: 22 / 150

Поделиться
Скачать
Moeller PS 416-BGT-4 Series Скачать руководство пользователя страница 22

Interference immunity

19

02/98 AWB 27-1208-GB

PS 416 system

Static discharges

 

may cause a system fault via 

conductive components which do not belong to the 
operating circuit (e. g. plugs, switches, mounting 
components). All freely accessible components 
which are not covered by a flap or covering are 
electrically connected to the rack. The guide rails of 
the card are provided with contact springs. Ensure 
that these contact elements function correctly.

Line-conducted interference

Line-conducted interference may be due to galvanic, 
capacitive and inductive coupling. All cards of the 
PS 416 system have appropriate suppressor 
elements which ensure the correct functioning of the 
cards according to the relevant interference class. 
The engineering of the system should not involve any 
switchgear with higher interference levels. 
Interference sources of this kind must be eliminated 
via an appropriate installation or suppressor 
elements.

Note

Ensure that you are free of electrostatic charge 
when working with operating elements and 
components that are covered. This especially 
applies to the battery, the memory card and the 
operating switches of the CPU.

For Immediate Delivery call KMParts.com at (866) 595-9616

Содержание PS 416-BGT-4 Series























































































































































Отзывы:

Нет отзывов