Hardware & Tool required
Customer Service 908-368-1025 www.modway.com
Page 2/4
Hardware & Tool required
Hardware & Tool required
Mx1
STEP 1:
1. Attach the
Headboard Leg(L)(5)
and
Headboard Leg(R)(6)
as per diagram shown
.
Place
JCBC bolt 60MM(C)
and tighten by
using
M4 Allen Key(M). Then Insert JCBCbolt 40MM(E)
and tighten by
M4 Allen Key(N).
2. Place the
Footboard Leg(L)(9) and Footboard Leg(R)(10)
as per picture shown and attach
JCBC bolt 50MM(D)
and tighten
using
M4 Allen Key(M).
STEP 2
:
1.Place
Headboard (1)
and
Side rail (L)(7) Side rail (R)(8)
on a carpeted or padded area as shown. Attach
Side rail (L)(7) Side rail (R)(8)
into
Headboard (1)
and by using
JCBB 80mm
Bolt (A),Spring Washer(K)
into the preholes
Headboard (1)
and
Footboard(2)
as per diagram
.
Tighten
with
M5 Allen Key (N).
2.
Insert
JCBC M6x70(B),Barrel Nut(J)
as per diagram shown and tighten with
M4 Allen Key(M)
to all 4 side bed corner.
3. Attach
Headborad Guardrail(3
) into
Headbord(1)
then insert
JCBC Bolt 50mm(D),Flat Washer 2mm(L)
and tighten by using
M4 Allen Key(M)
Ex2
Cx2
Ax4
Bx4
Jx4
Kx4
Nx1
C
Dx4
Mx1
Lx4
MOD-6047, MOD-6078
Dx4
