Hardware & Tool required
Customer Service 908-368-1025 www.modway.com
Page 2/3
Bx8
Gx8
Fx1
Hardware & Tool required
Hardware & Tool required
Ex1
STEP 1:
Place
Headboard (1)
,
Footboard (2)
and
Siderail (3)
on a carpeted or padded area as shown. Attach
Side rail (3)
into
Headboard
(1)
and
Footboard (2)
by
inserting
Flat Washer (G), Spring washer(H)
and
JCBB 25mm
Bolt (B)
into the holes of
Headboard (1)
and
Footboard(2).
Tighten with
M5 Allen Key (F).
STEP 2
:
1. Attach the
Support Bar (6)
to the predrilled hole at center of
Headboard (1)
by using
JCBC bolt 40MM(A)
and tighten by using
M4 Allen Key(E).
Repeat the same step at
Footboard(2),
then place
Center Support bar(4)
on the
Support Bar(6),
attach
JCBC bolt 40MM(A)
at predrill hole and
tighten by using
M4 Allen Key(E).
2. Place the
Center Support Bar(4)
as per picture shown and attach
JCBC bolt 40MM(A)
and tighten using
M4 Allen Key(E).
Repeat again at
Footboard(2)
3.Attach the
Adjuster(D)
to the
two
Cente
r
Support Leg(5).
4. Attach the
Center Support Leg(5)
to the
Center support bar(4)
as shown in diagram., Insert
JCBC 40MM (A)
to the predrilled hole and tighten by
using
M4 Allen Key(E)
Dx3
Ax9
Hx8
MOD-6045, MOD-6046
6
E
4
E
A
A
4
5
D
E
F
B
H
G
3
