Customer Service 908-368-1025
︱
www.modwayfurniture.com
Page 6 of 6
MOD-5421/5422/5423/5424/5425/5426
BED
P14
Cx1
Gx1
STEP 9:
Hardware & Tool required
STEP 10:
Gx1
Hardware & Tool required
P7
P7
11
P6
P12
P12
P7
P7
C
G
P14
P13
P14
P14
Pre-drilled holes at Side Rail
Assembly is complete. Your bed is ready to be enjoyed now!
P13
holes at Center Rail
P4
P3
P3
P4
P7
P7
P7
Insert 2 pieces of
Slat (P14)
into 1 piece of
Plastic Cover (P13)
as shown.
Insert the other end of the same
Slats (P14)
into the corresponding pre-drilled holes at each
Side Rail (P3&P4)
as shown.
Then insert the assembled
Plastic Cover (P13)
into the corresponding holes at
Center Rail (P7)
.
Repeat the same steps for the remaining
Slats (P14)
.
After checking all the connections, use
Allen Wrench (G)
to tighten all
Bolts (A&B&C)
clockwise until secure.
Insert 1 piece of
Bolt (C)
through the holes on
Stretcher (P6)
into the holes on
Center Support Leg (P12)
.
Use
Allen Wrench (G)
to tighten
Bolts (C)
, do not fully tighten
Bolts (C)
at this step.
